Volver a la cima

Holy Beams

  • AV Performance
  • Generative
  • IDM, Advanced Hip Hop
  • 2688 Views
  • Gustos
Holy Beams
[Texto disponible solo en inglés] Audio-reactive laser [ A/V live performance ]

Duración (minutos)

30

Qué se necesita

- 1 Projector (1920x1080 hdmi on stage)
- 1 PA
- 1 Audio mixer (2ch JACK? RCA? MiniJACK?)
- 1 table 2x1m
- 2 x D.I. Box
- 2 x 2 ways wedge monitors or Side fills (separate Aux send L-R)
- 1 x Front stage truss (min. 3m H) to hang up Laser projector by a standard clamp (Aliscaf)* center stage. Alternative: a 3m tripod with platform(eg. Manfrotto) at the FOH. A 220v, 50Hz Power strip is needed in the same place.(*) My ILDA cable is 25 meters long, it starts from the table center stage.
- 1 Hazer machine
- 1 strobe flash light eg. Atomic 3000 on stage, controllable from the table** (**) no other light projectors must be active during the show
- 1 Power strip (5 x EU-standard slot) 220V/50Hz (on table)
- laser can cover large surfaces with enough distance.
- 30 minutes setup time and sound check on the house systems with the aid of the local technicians.

Lo que traen los artistas

Laser projector 1W, 25 meters ILDA cable, Laptop, midi controller, analog synth

  • AV Performance
  • Generative
  • IDM, Advanced Hip Hop

Autores

Giuseppe Acito
Giuseppe Acito

Italy Emilia-Romagna

Eventos

LPM 2020 Rome
LPM 2020 Rome
domingo, 15 marzo 2020
LPM 2021 Apulia
LPM 2021 Apulia
28 // 27 agosto 2021
LPM 2022 Rome
LPM 2022 Rome
viernes, 10 junio 2022